Olympia Chimney Flue Liner Replacement Nationwide

Olympia Chimney Flue Liner Replacement: The San Antonio Owner’s Guide

An Olympia Chimney flue liner replacement in San Antonio typically runs between $2,400 and $4,800 installed, depending on the liner diameter, chimney height, and whether we’re replacing a single section or the full run. We stock Olympia Chimney-compatible stainless steel liners on our trucks and can usually complete the swap in a single visit. Most homeowners discover the liner has failed during a routine sweep or inspection, when our camera shows flaking metal, separation at a seam, or a liner that’s thinned to the point where exhaust gases are no longer fully contained. The good news: this is a repair we handle frequently, and once it’s done, the fireplace is safer than it’s been in years.

Call (361) 491-3153

Which Olympia Chimney Models This Applies To

Olympia Chimney manufactures liners in a range of diameters, from 4-inch up to 12-inch, and in both rigid and flexible stainless steel. The most common units we replace in San Antonio are the heavy-gauge 316L stainless liners used in wood-burning and gas fireplaces, though we also see the lighter 430-grade alloy on vented gas logs. The easiest way to identify yours is to look for the manufacturer’s label on the liner cap or the section visible inside the firebox; Olympia stamps the alloy grade and diameter directly on the metal near the top termination. If the label is gone, we measure the inner diameter and wall thickness on site and match it to the correct Olympia spec.

One compatibility gotcha worth knowing: Olympia liners are not always interchangeable with aftermarket flex liners of the same nominal diameter. The locking profile at the liner-to-appliance connector varies by model year, and in some San Antonio homes we’ve seen liners from the mid-2000s that require an Olympia-specific adapter rather than a generic coupler. For that reason, we prefer to use genuine Olympia liner sections when the existing run is still mostly intact, and we carry the common diameters and couplers on the truck. When a full liner replacement is needed, we’ll present you with the Olympia option alongside an equivalent DuraFlex or HeatShield liner, with honest pricing on both so you can decide based on budget and how long you plan to stay in the home.

Signs Your Olympia Chimney Flue Liner Replacement Is Failing

• Flaking metal or rust scale at the firebox opening. When a liner starts to go, tiny bits of oxidized stainless steel collect at the base of the fireplace. It looks like coarse red-brown grit that wasn’t there before.
• A metallic, acrid smell during or after a fire. As the liner thins, it can no longer keep combustion byproducts fully contained, and the odor seeps into the room. This is different from normal wood smoke smell; it’s sharper and lingers longer.
• Reduced draft and smoke backing into the room. A liner with separation at the seams disrupts the air column, which drops the draft and sends smoke curling out of the fireplace when the door is open.
• Visible separation at the liner joints. During an inspection, our camera often shows gaps where sections of liner have pulled apart. This happens most often in San Antonio homes where the chimney runs through an unconditioned attic, and years of thermal expansion and contraction have worked the joints loose.
• White staining or discoloration on the chimney exterior. When exhaust gases are no longer fully contained, moisture condenses inside the chase or masonry and migrates outward. If you’re seeing white streaks that won’t wash off, the liner is a likely culprit.

Replacement Cost & What’s Included

Here’s what you can expect to pay in San Antonio for an Olympia Chimney flue liner replacement, installed by our crew:

• Single-section liner patch (one or two damaged sections): $350 – $750
• Full flexible liner replacement, 6-inch, single-story chimney: $2,400 – $3,200
• Full liner replacement, larger diameter (8″+) or two-story chimney: $3,400 – $4,800
• Camera inspection before and after the job: included
• Written price before any work starts: always included, never optional

What drives the range is mostly liner diameter and run length. A taller chimney needs more linear feet of stainless, and 8-inch liner costs meaningfully more per foot than 6-inch. If the existing Olympia liner can be patched rather than fully replaced, the job is significantly less expensive and we’ll show you the camera footage to prove it. If it can’t, we’ll say so plainly and hand you a written price before the first tool comes off the truck. Every liner replacement we do is backed by our 365-Day Done Right Promise: if the work isn’t right, we make it right, no fine print.

DIY or Call Us?

There is a narrow set of things an owner can safely check on their own: shine a flashlight up the flue from the firebox and look for obvious flaking, rust, or gaps; note any new odors or drafting problems; keep a record of when the chimney was last swept. That’s about it. Removing and reinstalling a flue liner means working at height on the roof, handling sharp stainless edges, and making connections that must be gas-tight. A poorly seated liner in a wood-burning fireplace can send carbon monoxide into the living space, and you won’t always smell it. This is one repair where the cost of our labor is cheap insurance. If you suspect your Olympia liner is compromised, call (361) 491-3153 and we’ll put a camera up the flue and show you exactly what’s there before any work is recommended.

FAQs